Ionic-pro CA500 User Manual Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 11
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
To Clean the Ionizing Wires
The internal ionizing wires need to
be cleaned after every two weeks
of use. There is a Wire Cleaning
Mechanism used to clean the internal
ionizing wires which you slide up and
down to scrape off particle residue.
(see Diagram B of the Operating
Panel to locate the Wire Cleaning
Mechanism). Lift and lower the Wire
Cleaning Mechanism three or four
times to thoroughly clean the ionizing
wires (see Diagram H).
REMEMBER TO ALWAYS RETURN THE WIRE
CLEANING MECHANISM TO ITS ORIGINAL POSITION
BEFORE ATTEMPTING TO RESUME USE OR THE
UNIT WILL NOT FUNCTION.
11
CLEANING & MAINTENANCE
10
CLEANING & MAINTENANCE
HELPFUL TIPS: Remember to clean your Ionic Pro
®
ionic air
purifier every month and any time the red CLEAN/FAULT light
comes on or whenever you hear your unit begin to make
excessive noise.
To Clean the Collection Blades
Turn off and unplug your Ionic Pro
®
air
purifier. Let the unit rest a minute. Next, lift
off the removable cap and slide the collection
blades out of the top of your Ionic Pro
®
ionic
air purifier.
Do not touch the metal blades until after
discharging residual electricity by touching
blades to an electrical ground such as water
pipe or metal faucet. Wipe away the trapped
particles collected on the three blades with a
slightly damp sponge or cloth. If you use a
slightly damp cloth to clean the blades, it is
possible the collection blades will be
completely dry within two to three hours.
Always allow the collection blades to dry
thoroughly before resuming use.
IMPORTANT: To avoid damaging your Ionic Pro
®
ionic air purifier, make sure the
collection blades are completely dry and free of all moisture and that your Ionic
Pro
®
ionic air purifier is turned off and unplugged before attempting to re-insert the
collection blades.
If you have used soap and water to clean the collection blades, wait at least 24
hours to ensure that they are thoroughly dry before re-inserting them into your
Ionic Pro
®
ionic air purifier.
COLLECTION BLADES
H. CLEANING WIRES
IP_CA500_Mnl_Rev_092707.qxp:Layout 1 6/3/08 2:56 PM Page 12
Page view 6
1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments